Skip to content

Need another language? Your browser can translate this page: in Chrome or Safari, look for Translate in the menu.

Other languages: Türkçe · Polski · Română · العربية · اردو

Radiator cold

The heating is on and other radiators are warm, but one radiator is cold all over, or warm at the bottom and cold at the top.

Stop. Don't do it yourself, report it, if:

  • Water leaking from the valve or the radiator.
  • Several radiators are cold: that is a boiler or system problem, see "No heating or hot water".
  • Never take a radiator off the wall or drain the system.

Check 1/4

  1. Turn the valve on that radiator (the white head with numbers) to the highest number and wait 30 minutes.

  2. Still cold all over? Unscrew the white head by hand (anticlockwise). Underneath is a small metal pin. Press it gently with a finger a few times. If it moves up and down freely, screw the head back on. If it does not move with gentle finger pressure, do not force it and do not use pliers: leave it and report it.

    Press the pin gently with a finger. Never force itIllustration: yours may look different.
  3. Warm at the bottom but cold at the top? It has air in it. With the heating off and the radiator cool, hold a cloth under the small bleed screw at the top corner and open it a quarter turn anticlockwise with a radiator key. Close it as soon as water appears. No radiator key? Report it instead.

    A quarter turn anticlockwise with a radiator key. Close it when water appearsIllustration: yours may look different.
  4. After bleeding, check the boiler pressure gauge. The gauge shows a normal range (often a green band). Below that range means the pressure is low; in the red means too high.

    Boiler pressure gauge

Did that fix it?

Further reading: British Gas: if your heating isn't working

Checked 26 October 2026. These checks are optional: you never have to do a repair yourself.

Other guides

Radiator cold | OGKlettings tenant help