Skip to content

Need another language? Your browser can translate this page: in Chrome or Safari, look for Translate in the menu.

Other languages: Türkçe · Polski · Română · العربية · اردو

No heating or hot water

No heating, no hot water, or both.

Stop. Don't do it yourself, report it, if:

  • You smell gas: leave the flat and call 0800 111 999.
  • Never take the cover off the boiler or touch anything inside it. Only a Gas Safe engineer may work on it.
  • Water dripping from the boiler or its pipes.

Check 1/6

  1. Is it the heating, the hot water, or both? Write that down for the report.

  2. Check the thermostat is on, set a few degrees above the room temperature, and has working batteries. Check the timer or programme is set to "on" for now.

    Left: a dial, turn it up. Middle: a digital thermostat, press the up button. Right: a timer or programmer, check it is set to onIllustration: yours may look different.
  3. Is the boiler display lit? If it is blank, check the fuse box: a switch may have tripped (see "Power off or trip switch").

    Boiler
  4. Look at the boiler pressure gauge. If it is low, or the boiler shows a fault code, follow "Boiler pressure or fault code". The gauge shows a normal range (often a green band). Below that range means the pressure is low; in the red means too high.

    Boiler pressure gauge
  5. Below freezing outside and the boiler stopped? A frozen condensate pipe is a common cause: see "Frozen condensate pipe".

  6. No boiler in your home? If your heating comes from a building heat network through a heat interface unit (HIU), skip the boiler checks: do not open the HIU, check the fuse box, then report it.

Did that fix it?

Further reading: British Gas: if your heating isn't working

Checked 26 October 2026. These checks are optional: you never have to do a repair yourself.

Other guides

No heating or hot water | OGKlettings tenant help